€2.58
-
Free shipping in metropolitan France From 30 €
-
Shipping period
48 to 72h business days -
Customer service
01 42 72 81 56
By buying this product you can collect up to 45 points. Your cart will total 45 points that can be converted into a voucher of €4.50.
Kit Zlide Tube 3000mah 4ml - Innokin
The Zlide tube kit consists of a Mod Zlide and a 4ml Zlide atomizer.
The Mod Zlide is simple to use, it has an integrated battery of 3000mAh with an intelligent system of automatic identification of resistors, so with a resistor > 1Ω the power will be 16W and with a resistor 1Ω the power will be 13W.
The Zlide is a 4ml atomizer, compatible with all Z-Coils resistors and has child safety (remove the Drip tip to unlock the filling slide).
Technical sheet
Autonomie | 3000mAh |
---|---|
Capacity | 4ML |
Origin Country | Chine |
Découvrez également
Product description
The Zlide Tube kit has a shape very appreciated for its ergonomics and discretion: that of vape-pen. It consists of a battery and a 4ml D24 Zlide clearomiser assembled at a 510 pin. A formula that has proved its worth, that Innokin has developed here in beauty in collaboration with Phil Busardo and Dimitris Agrafiotis. The brand has thus carved a solid material, stainless steel, in a reasonable diameter of 24mm.
This kit will be very practical to carry in a pocket, to always accompany you without showing itself, and will hold perfectly in hand for a comfort of use perfect. The little plus: you can easily replace the clearomiser provided by the legendary Zenith of Innokin whenever you feel like it!
Experimenting with an even tighter vape or more airborne pulling will also be possible with your Zlide Tube kit, compatible with all the other Zenith resistors developed by Innokin.
In this perspective, changing a resistance on the Zlide Tube kit will be a breeze:
1. Unscrew the Tube Zlide kit clearomiser base;
2. Pull on the installed resistor to remove it;
3. Grasp a new resistor and place e-liquid on all the openings on its perimeter to prime it into e-liquid;
4. Push the latter into the Zlide D24 clearomiser until it is perfectly in place;
5. Screw the Zlide D24 base of the Zlide Tube Kit again and fill the Zlide Tube Kit reservoir with ¾ as usual;
6. Wait about ten minutes before you start vaping again, to allow time for the resistance priming to complete in order to avoid a dry-hit.
Like the entire Zlide Tube Kit, the Zlide D24 Clearometer Filling System is ingenious and practical to use.
The top-cap of the device allows a filling called "push-to-fill" and includes an arrow that indicates where to push to slide it. However, to protect children and avoid unexpected opening during transport, it will be perfectly locked thanks to the owner drip-tip installed. It will therefore be necessary to remove the latter before sliding the top-cap and to clear the access to a filling hole.
You can then pour the e-liquid into the opening provided for this purpose to fill the tank at three-quarters, then close the top-cap and replace the drip-tip to lock it. Enough to fill up in just a few seconds and be sure not to lose a drop!
Contenu du Pack :
-
1 Kit Zlide Tube ;
-
1 Résistance Zénith 1.2ꭥ (préinstallée) ;
-
1 Résistance Zénith 0.8ꭥ supplémentaire ;
-
1 Réservoir en Pyrex droit de remplacement (4ml) ;
-
1 Kit de joints de rechange ;
-
1 Câble micro-USB ;
-
1 Notice d’utilisation.
