Kit Argus SE - VOOPOO

Un pod tout en brillance

True to the principles of the Argus range, Voopoo has made the Argus Pod SE a pod with reduced dimensions. It measures only 93.2 x 26.1 x 13.8mm and is a thin pod with limited height. It is therefore an easy device to slip into a pocket.

In addition, this pod consists of zinc alloy and, depending on the variations, polycarbonate or leather when its cartridge is made of PCTG. The Argus Pod SE is therefore not lacking in robustness and a pleasant feeling will be felt to the touch, especially as the rounded edges ensure the quality of the grip.

But, above all, Voopoo has polished the appearance of this model with brilliant finishes and a color that harmonizes with shade and light. This aesthetic touch is a treat.

An easy to use pod

In designing the Argus Pod SE, Voopoo wanted to design a kit for those who take their first steps in vaping. Target achieved for the manufacturer. He fitted this electronic cigarette with the Gene.Ai 1.2, a chipset that delivers a stable and maximum power of 18W. In other words, this chipset delivers a moderate power that is suitable for this type of vaper.

This product is also simple to use. It requires no adjustment, counts no buttons or screen, and is provided with the auto-draw function, which means that you only have to inhale for it to work. As for the power, it will be automatically adjusted according to the resistance used.

On the other hand, this kit is powered by an integrated 800 mAh battery, which brings a significant vaping time. And for recharging, a USB Type-C cable is provided. 3 LEDs are also present on the side to indicate the level of charge according to 3 codes:

1 illuminated light when the load level is between 0 and 33%

2 LEDs illuminated when the load level is between 33 and 66%

3 lights illuminated when the load level is between 66 and 100%

Finally, 6 protections accompany the user during the vape. These include protection against inhalations that are too long (longer than 8 seconds), protection against short circuits, protection against overload and protection against excessive battery discharge.

Une cartouche de 2ml avec résistance intégrée

Like any pod, the Argus Pod SE has a cartridge. It provides a capacity of 2ml, fills on the side and limits the risk of leaks by means of a structure consisting of several layers. In addition, its transparency gives a view of the e-liquid level while the airflow - located on the top of the battery - is adjusted by means of a sliding switch. Moreover, the cartridge has 4 enlarged air intakes under its base. The vapor will thus obtain a flavor full of softness and made delicious thanks to the atomization technology ITO. In the end, he will enjoy this cartridge which, by the way, allows a MTL print. Another appreciable point if he is a beginner vapor.

Finally, this cartridge is an integrated resistance cartridge. This resistance can be:

A resistance of 0.7 ohm

A resistance of 1.2 ohm

A cartridge with each resistor is supplied and it should be noted that it is compatible with the other models of the Argus series.

There is therefore enough to be seduced by the Argus Pod SE of Voopoo, and what one is vapor beginner or experienced. Indeed, if the user experience is already noticeable, he will like to use this kit as an extra kit.

Content:

1x Argus Pod SE

1x cartridge with 0.7 ohm built-in resistance

1x cartridge with 1.2 ohm built-in resistance

1x USB Type-C cable

1x user manual