Aspire links new products with this time a new tubular kit, the BP Stik.
This pod kit promises to be a real success in view of its design and technical characteristics.
In a pod of 119 x 28 x 26.5 mm, we find an integrated battery of 2500mAh, a maximum power of 80W, three operating modes and finally a wide cartridge of 5ml.
So much quality in a pod composed of aluminum and leather for a pleasant grip. Difficult to find defects to this kit BP Stik.
BP Stik : le Stik de qualité supérieure
Aspire launches its new BP kit range. To mark the occasion, the brand is making a big impact with this BP Stik tubular kit! This new vape jewel stands out for its design and features. The mixture between aluminium and leather gives a very classy side to the pod in addition to offering a very pleasant grip. Aesthetically speaking, this BP Stik is a real success with a simple and clean design.
Indeed, on the entire 119 x 28 x 26.5 mm, we find only the main button. No screen, no selection button, just the minimum. And again, it is possible to take advantage of this kit without even using the main button since the kit has 3 modes of use:
Press the main button
Both modes of use at the same time
Up to 80W of power!
In addition to the successful visual aspect, the greatest qualities of this BP Stik are related to its technical characteristics. Starting with its built-in battery and 2500mAh battery life. A very wide autonomy to enjoy throughout the day without having to think about reloading even using the kit to the maximum of its power.
The latter adapts automatically according to the equipped resistance but can go to a maximum of 80W. A very good power that allows to enjoy a large DL print. The chipset allows to vary the power according to 3 modes: Low-Medium-High. The Low mode will be set to the low value of the equipped resistance, the Medium mode will offer battery power in the resistance range and finally the High mode will target the maximum power of the equipped resistance.
In addition to the operating modes, the chipset of this BP Stik has several protections to ensure a safe vapor.
Finally, to reload everything, simply plug the USB Type-C cable (provided) into the dedicated port that is opposite the main button.
Compatible with BP and BP Mesh resistors
After the battery detail, it’s time to look at the new BP cartridge. With a capacity of 5ml, this new cartridge offers a very good autonomy in e-liquid, always with the aim of enjoying a thick print. Note that the kit has a rotating airflow system to maximize steam production. To more or less open the airflow, simply turn the cartridge.
Concerning the resistors, this new cartridge is compatible with many resistors of the brand Aspire to offer vapors a full panel of vapor. It supports all 0.15 ohm to 0.4 ohm BP Mesh resistors, as well as 0.6 ohm and 1.0 ohm BP Coil resistors. Note that the 0.15 ohm BP Pro Mesh is not supported. The purchase kit provides 0.15 ohm BP Mesh resistance and 0.4 ohm BP Mesh resistance.
Finally, to finish with the analysis of this cartridge, the filling of the latter is done from the bottom and in a simple way. Simply flip the cartridge and then unclip the leak tab to gain access to the fill hole. Once the resistance is well soaked, all that remains is to enjoy.
1 x Stik BP Battery
1 x 5ml BP Stik cartridge
1 x Resistance Bp Meshed 0.15 ohm
1 x BP Meshed resistance 0.4 ohm
1 x USB-C cable
1 x User Manual