To avoid any leaks in your clearomizer, you have to check that your resistance is well tightened, a resistance badly screwed, produces leaks in mouths, which is not pleasant. If the resistor is well tightened, in this case check that your clearomizer is not broken or that there is not a gap between the clearo and the mod, it must always be nested in the valve, otherwise it is the leak for sure!
If the resistor and the clearo are well fixed in this case, you have to look at the state of the joints. A user gasket does not work properly, which causes leaks.
When you have leaks, you have to clean your clearomizer directly, most of the time that's why the leaTo avoid any leaks in your clearomizer, you have to check that your resistance is well tightened, a resistance badly screwed, produces leaks in mouths, which is not pleasant. If the resistor is well tightened, in this case check thaks come from.
To clean it, nothing could be simpler: simply disassemble all the accessories, clearomizer, tank, resistances, then clean them with warm water, especially dry them, then put all the accessories back. Once the cleaning is finished, go and see if the leaks persist or not.
You must of course respect the maximum level your tank can hold. If the leaks started when you changed your liquid, it is probably due to the fact that some liquids are not adapted to all clearomizers. They have difficulty to withstand when the level of vegetable glycerin is high. Ask your salesperson for advice on which clearomizer is best suited to your needs.
It's possible that your airflow is not adjusted properly for your needs, an airflow at minimum limits the amount of air that enters your unit, so you have to pull hard and long. Some people like this pull, but if you inhale too hard with too many repetitions, you run the risk of putting liquid in the resistance, which can flood it and thus cause a leak. To avoid this, simply open your airflow a little to let the air through.
It is possible that leaks may come from the position you are spraying from, just hold your steamer vertically to avoid any risk of leaks.
After all these manipulations, if there are still problems with leaks, we advise you to come to the store so that professionals can advise you and help you face the problem.